Yetter 2967-135 Residue Manager Attachment for Case Coult Manual de usuario

2967-135 RESIDUE MANAGER ATTACHMENT FOR 2960-020 2960-020-MW CNH UNIT MOUNTED COULTER YETTER MANUFACTURING CO. FOUN

10MAINTENANCE Grease must fill this Hubcap cavity.

11MAINTENANCE Lubrication CAUTION: To help prevent serious injury or death to you or others caused by unexpected movement, service machine on a level

12MAINTENANCE Lubrication Symbols Lubricate with grease at hourly interval indicated on symbol. Lubrication Intervals IMPORTANT: The recommended s

13MAINTENANCE Storing the Equipment Store the machine in an area away from human activity Store machine in RAISED position. Install service locks on

14PARTS IDENTIFICATION PRODUCTION DATE 12/02 – PRESENT

15PARTS IDENTIFICATION PRODUCTION DATE 12/92 – 11/02

16RESIDUE MANAGER WHEELS

17 NOTES:

18NOTES:

19NOTES:

2FOREWORD You’ve just joined an exclusive but rapidly growing club. For our part, we want to welcome you to the group and thank you for buying a Ye

20 Our name Is getting known Just a few years ago, Yetter products were sold primarily to the Midwest only. Then we embarked on a program of

3SAFETY A brief description of signal words that may be used in this manual: CAUTION: Used as a general reminder of good safety practices or to di

4 TABLE OF CONTENTS FORWARD…………………………………………………..…………………………………………………... 2 SAFETY INFORMATION……….…………………………………………………………………………….…3 TABLE OF CONTENTS………

5ASSEMBLY INSTRUCTIONS 1. Remove 5/8” X 5” bolt through hub of unit coulter. 2. Using 5/8” X 6” bolt supplied, attach the 2967-226 and 227 adjus

6OPERATION STEP 1. Adjust the residue manager to move crop residue aside and not move any soil. Adjustments to the residue manager may have to be

7PLANTER HEIGHT ADJUSTMENT Figure A. – The planter hitch and frame are both 20” off the ground. To ensure this, visually check to see that the pl

8MAINTENANCE BEARING ASSEMBLY AND LUBRICATION Regularly inspect the residue manager for loose or worn bolts. Repair and replace as needed. Prac

9MAINTENANCE NOTE: Be certain to align the grease fitting with the slot in the wheel and the hubcap so that the grease can flow freely. IMPORTANT: